Insulation & Construction Archives | BEWI

home//Insulation & Construction

grid_view list

Insulation & Construction — Jackoboard®

Jackoboard® Aqua

Mounting plate for drain in shower. Available with different drain hole locations.

Jackoboard® Aqua Line Pro

Shower element with channel drain for efficient drainage.

Jackoboard® Aqua Reno

Mounting plate for drain in the shower. Built-in water trap.

Jackoboard® Canto

Used for cladding pipes and technical installations.

Jackoboard® Flexo

Mounting plate for creative solutions. Flexible plate for curved constructions.

Jackoboard® Plano

Jackoboard® Plano is the perfect underlay for tiles and plasters in wet rooms and other rooms where moisture may be present.

Jackoboard® Sabo Toiletboard

Used for covering wall-hung toilets.

Insulation & Construction — Boards

Air gap board

For insulation of tier of logs in attics, BEWI Air gap board is the easiest and best alternative when you want to avoid condensation and mould...

Drainage board EPS

EPS board with or without non-woven fabric for drainage and insulation of basement walls

Drainage board EPS Grey

Open to diffusion of inside moisture, stops outside moisture

Drainage board XPS

Insulating drainage board with vertical drainage channels for basement walls.

Insulation board EPS

Ultimate insulation of foundations, roofs, floors och facades

Insulation board EPS Grey

With 20% better insulation performance than white EPS

Insulation board XPS - Rabbet Edge

Moisture resistant XPS board for insulation with specific demands for long-term compressive strength

Insulation board XPS - Straight edge

XPS insulation with high compressive strength, high moisture resistance and excellent protection against heat and frost

Plasterboard

BEWI's foam boards intended for facade insulation are an excellent alternative as wall insulation for both new construction and additional insulation...

StyroHeat

StyroHeat® has high strength, good insulation and is easily adapted to the floor design with ordinary hand tools.

Underfloor heating board IsoFlex

If you need to supplement your foundation with underfloor heating, BEWI's underfloor heating board is the obvious choice.

uniPIR insulation boards

PIR rigid foam insulation boards are used for cavity walls, façades, internal walls, pitch, tapered and flat roofs, and commercial building...

Insulation & Construction — Construction elements

BEWI cast element

BEWIs cast element is a pre-assembled system for casting a slab on the ground. BEWI cast element is insulation and formwork in the same product. The...

BEWI I-unit

Insulating unit with additional cement board for a modern look.

BEWI ICF System

Low energy houses according to the building block principle

Foundation Garage-Unit

L-units for construction of e.g. garage where a raised plinth is desired.

Foundation L-Unit

The baseboard units have been constructed so that you can easily build a safe and sustainable foundation.

Foundation L-unit

With an I-unit, you build a foundation in a rustic look. The brushed surface gives life to the foundation and gives your house a unique charm.

Foundation L-unit concrete

The elements are designed to easily build up a safe and durable foundation.

Foundation TF-unit

BEWI TF-unit are used to be able to carry higher loads as in e.g. tile facade.

PIR roof panels

Roof panels with the polyisocyanurate (PIR) rigid foam core show excellent thermal insulation properties, thus allowing to decrease panel thickness.

PIR wall panels with hidden fastening

Wall panels with hidden fastening and the polyisocyanurate (PIR) rigid foam core show excellent thermal insulation properties, thus allowing to...

PIR wall panels with Thermo lock

Wall panels with the Thermo lock and the polyisocyanurate (PIR) rigid foam core show excellent thermal insulation properties, thus allowing to...

Standard MW wall panels

Wall panels with mineral wool (MW) core are designed for applications with high fire resistance requirements, thus they are used for fire walls, fire...

Standard PIR wall panels

Standard wall panels with a polyisocyanurate (PIR) rigid foam core show excellent thermal insulation properties, thus allowing to decrease panel...

Styroment

Support system for ICF system

Customized for our ICF system. Makes it easy to adjust the working height when filling concrete.

Insulation & Construction — Bag

Return bag

Return bag for waste material.

Insulation & Construction — Blocks

Road blocks and filling

Cellulose reduces settlements and is used to advantage as easy filling in roads.

Insulation & Construction — Beads

Loose beads

Loose beads are suitable for weight reduction and insulation of concrete products, furniture filling, packaging and additional insulation. The size of...

Insulation & Construction — Foil

Cover foil

Construction foil various interior and exterior masking works.

Gram Vapor Barrier | Standard PE

Age-resistant polyethylene film intended to be used as an air and vapor barrier in exterior walls, ceilings and floors.

Gram Vapor Barrier | Sugarcane

The world's first vapor barrier made of sugarcane

Polyethylene film

Insulation & Construction — Pipe

Pipe insulation XPS

XPS box that minimizes the harmful effects of freeze thaw cycles on water and drainage installations

Insulation & Construction — Radon

RadoVent

Insulation & Construction — Accessories

Drain strip

A finishing strip is used to cover the upper edge of the drainage boards.

Drainage collection cleat

Drainage collection boards are used in the construction of falls against roof drains and consists of combinations of wedges. Contact us if you need...

Electric knife

Electric hot knife for fast, clean cuts in EPS & XPS

Fixing Wedge

A fixing wedge is used to lock together two L-elements during priming. The fixing wedge is placed in the bevelled edge of the element.

Handheld cutter for EPS and XPS

Electric hot knife for fast, clean cuts in EPS and XPS

Hulling

Plastic nails are used to hold the foam together with the plinth units and to hold the foam layers together during casting so the foam does not float...

Joint plate

Joint plate is used to pull the plinth unit together at the outer edge. Consumption 1 pc per unit and 2 pcs per corner.

Nail plate

A nail plate is used to fix the base plates on units with each other and mould beams. The plate consists of unfolded metal tips that make the...

Non-woven fabric

The fabric is used to prevent fine-grained material from penetrating and impairing the draining properties. The fabric has class II according to VV's...

Pile mould

Insulation and mould for founding concrete plates for pole foundations.

Roof Wedge

Roof wedge is used for building slopes at eaves, roof drains etc

Slope of roof

With this system, you can build as wide roof pitches as you want. The backing board is an ordinary board with a certain thickness depending on which...

Winter Mat

BEWI Winter Mat is a concrete cover mat intended for covering eg freshly poured concrete, insulation against frost penetration, moisture and heat...